Wear disposable gloves to avoid skin contact. Remove foil sticker & film wrapper and set aside for storage of any unused putty. Wash hands thoroughly after handling. Use in a well ventilated area.

1. For best results, roughen smooth surfaces with sandpaper before applying putty. All surfaces should be clean and free of grease, oil, or other loose particles.
2. Cut off desired amount of putty.
3. Mix by kneading the putty to a uniform color (approx. 30-60 seconds). Putty will not harden completely if not mixed thoroughly.
4. Apply putty by firmly pressing to the project surface within 5 minutes of mixing. The epoxy needs 10 minutes to set and is paintable after 1 hour. It takes 24 hours for the Epoxy Putty to be fully cured. Wear a dust mask and protective eyewear when sanding or drilling cured product.
5. Clean up: Remove any excess material before hardening. To clean the surface while the Epoxy Putty is still wet/uncured, wipe the area with soap and water, Acetone, or Isopropyl Alcohol (IPA). For cured/dried adhesive, mechanical means such as sanding scraping, or chiseling are necessary.
6. Storage tips: Store the putty stick in the plastic vial after use and minimize air exposure. Place foil sticker back on the end of the Epoxy Stick. Replace film around the putty stick and ensure cap is secured tightly. Store in a cool, dry place.

APPLICATION TEMPERATURE:  4°C to 40°C

SERVICE TEMPERATURE:  -28°C to 148°C

SET TIME:  10 minutes

CURE MECHANISM:  2 Part Reaction, requires mixing

INDOOR: Yes

OUTDOOR:  Yes

FREEZE/THAW STABLE:  Yes

MOISTURE RESISTANT: Waterproof†

SHAPEABLE: Yes

PAINTABLE: Yes

SANDABLE: Yes

TAPPABLE: Yes

DRILLABLE:  Yes

STAINABLE:  No

FOAMS WHEN CURED: No

SHRINKS WHEN CURED:  No

CURED COLOR: Grey

GAP FILLING: Yes

TECHNICAL STANDARDS: NSF/ANSI 61 certified drinking water safe.

How should I store Gorilla All Purpose Epoxy Stick?
Store the putty stick in the plastic vial after use & minimise air exposure. Place foil sticker back on end of epoxy stick. Replace film around the putty stick and ensure cap is secured tightly. Store in a cool, dry place. Store away from children and animals.

What’s the best way to apply Gorilla All Purpose Epoxy Stick?
• For best results, use a clean set of disposable gloves for every
• To ease mixing, allow the putty to come to room temperature. DO NOT MICROWAVE OR
• Thoroughly knead putty with fingers to a uniform colour (approx. 30 60 seconds).
• If a smooth finish is desired, once the epoxy is in place, smooth with wet gloved fingers as it

What’s the best way to use Gorilla All Purpose Epoxy Stick for Plumbing applications?
• Turn off water and dry all
• Make sure that the putty patch is at least 13mm larger than the size of the area to be repaired. Press the putty in
and around the crack or hole to plug the area to be repaired. Smooth and feather the epoxy around the edges to ensure good contact.
• Wait at least 1 hour prior to turning water back

Is Gorilla All Purpose Epoxy Stick drinking water safe?
Gorilla All Purpose Epoxy Stick is NSF/ANSI 61 certified drinking water safe. It can be used in contact with potable water supply and will not leach contaminants into water supply.

Does Gorilla All Purpose Epoxy Stick have an odor?
There is a pungent, sulphurous odour during the mixing process but Gorilla All Purpose Epoxy Stick is odorless once cured. We recommend using Gorilla All Purpose Epoxy Stick in a well ventilated area.

How do I remove Gorilla All Purpose Epoxy Stick from my surface?
To clean the surface while the epoxy putty is still wet/uncured, wipe the area with soap and water, Acetone, or Isopropyl Alcohol (IPA).
For cured/dried adhesive, mechanical means such as sanding, scraping, or chiselling are necessary.

How do I remove Gorilla All Purpose Epoxy Stick from my body/skin?
If the epoxy putty is still wet/uncured, wipe the area with soap and water, Acetone, or Isopropyl Alcohol (IPA).
For cured/dried adhesive, let the product wear off.

What should I do if I think a human or animal has ingested Gorilla All Purpose Epoxy Stick?
If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If, breathed in, move person to fresh air.
For medical emergencies, call Australian Poisons Information phone number.

Additional product safety and first aid information can be found here