For best results, always test on a scrap of intended fabric. Pre wash fabric without using fabric
softener. Best if used between 10 C and 32 C.
1.Apply adhesive to each surface to be bonded.
To maximize bond strength: Wait approximately two minutes for adhesive to partially dry
before joining surfaces
2.Press surfaces firmly together.
NOTE: Bond forms immediately and can be difficult to reposition.

Cure Time
Allow for a minimum of 24 hours for full cure. Wait a minimum of 3 days before washing and ironing. Wash on delicate cycle and dry on low/no heat.
Storage Tips
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.
Clean up
Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.
Paintable
When fully cured.

*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products.
Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
For First Aid and SDS information, click here

Application Temperature:10° to 32.2° C, best at room temperature

Outdoor: Yes

Moisture Resistant: Waterproof

Paintable: Yes – can be painted with water and oil based paints, spray paint

Sandable: Yes

Stainable: Yes

Cured Color: Clear

Storage: Flammable adhesive, do not use or store near heat, sparks, flames, or while smoking. Store in a cool, dry location. Wipe nozzle clean before replacing cap, for easy re-open apply a thin coat of petroleum jelly to threads.

Gap Filling: No

Photo Safe: Yes

Washer & Dryer Safe: Yes

How should Gorilla Fabric Glue be stored?
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: for easier re opening, apply a thin coat of petroleum jelly to the threads before replacing cap.
What surfaces does Fabric Glue adhere to?
Gorilla Fabric Glue can be adhered to many surfaces including: Fabric, Felt, Beads, Wood, Canvas, Ribbon, Sequins, Leather, Paper, Foam and Rubber
*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Is Gorilla Fabric Glue food safe?
Fabric Glue should not be used around food.
How do you clean up Gorilla Fabric Glue?
When using Fabric Glue, it is best to wear safety glasses and chemical resistant gloves. To clean uncured adhesive: wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface. See first aid treatment for skin contact.
Is Gorilla Fabric Glue gap filling?
No
Is Gorilla Fabric Glue UV Resistant?
Yes
Is Gorilla Fabric Glue stainable?
Yes, Gorilla Fabric Glue is stainable when fully cured.
Is Gorilla Fabric Glue sandable?
Yes, cured Gorilla Fabric Glue is sandable.
Is Gorilla Fabric Glue paintable?
Yes, when fully cured.
Is Gorilla Fabric Glue Washer/Dryer safe?
Yes
Is Gorilla Fabric Glue photo safe?
Gorilla Fabric Glue is safe to use with photos.