GORILLA WELD
Directions
Gorilla at Work
Related Products
FAQs

GORILLA WELD

TOUGH, SERIOUS STRENGTH, STEEL BOND EPOXY


GorillaWeld™ is an incredibly strong, heavy duty two part adhesive. The tough, steel bond epoxy formula has a 298kg/cm2 (4250 PSI) bond strength and sets in just 10 minutes. GorillaWeldTM is waterproof and versatile, creating a long lasting, permanent bond to: metal, plastics*, concrete, ceramics, PVC, fiberglass and more!

PRODUCT FEATURES

  • Incredibly Strong – The tough, steel bond epoxy has a 298 kg/cm2 (4250 PSI) bond strength.
  • Versatile & Waterproof – Creates a long lasting, permanent bond to: metal, plastic, concrete, ceramic, PVC, fiberglass and more!
  • Sets in just 10 minutes – Full cure in 24 hours.
  • Dries Dark Grey
  • Non-Drip Formula – Allows building & shaping of the material!
  • Once Cured – Can be shaped, tapped, filed, sanded, and drilled.
BONDS: Metal, Plastic*, Concrete, PVC, Fiberglass, Ceramic & More!
 

Available Sizes

2 x 14.7ml (0.5fl.oz.) Tubes

MSDS

GORILLA WELD Directions

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing.

  1. Remove cap from each tube and use top of cap to puncture foil seal.
  2. Dispense equal parts from each tube onto a clean, disposable surface.
  3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform.
  4. Apply mixture to surface within 3 minutes.
  5. Clamp surfaces together and leave undisturbed for 10 to 30 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied.

*Note: Not recommended for use on polyethylene, polypropylene or similar plastics.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA WELD®FAQs